Make a donation

Author Topic: Noisy release bearing  (Read 1816 times)

Offline Whitexed30

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 49
Noisy release bearing
« on: February 07, 2015, 12:44:15 pm »
Getting a rattle even from cold and when you push the clutch in it goes?? only had the car 2 weeks from a independent dealer

Offline hunter2003k

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 37
    • Email
Re: Noisy release bearing
« Reply #1 on: February 07, 2015, 06:46:07 pm »
My gti had/has a noisy release bearing sound so i replaced the clutch flywleel and bearing and after putting it back together it was still there, all LUK parts same as factory. There was a bit of play on the gearbox input shaft so its looking like the gearbox bearings are gone, does the same rattly at idle untill pressing the clutch in and wines when driving.

Get it back to the garage expensive bill to do yourself.

Offline john87

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 11
  • -Receive: 53
  • Posts: 790
    • Email
Re: Noisy release bearing
« Reply #2 on: February 07, 2015, 07:55:47 pm »
I had this on an 05 civic, a whirring sound at idle which disappeared when the clutch was pressed. Turned out to be gearbox input shaft bearings
VCDS Hex-USB +CAN (Central Scotland)